So your wine labels have arrived - you are VERY excited! Now let's apply them...

Bottle shape choice

• Smooth bottles with no texture work best.
• All the same width from bottom to top. And the long straight part longer then your sticker or you may get some bubbles and bunching with your sticker.

Existing label on your bottle/s

• Best to choose a bottle that hasn't got the design printed directly on the glass.  If you do have one of these, make sure the label will cover the whole design.
• Paper labels are easier to remove then clear ones.

Removing wine labels

• Submerge bottle/s in water so the old label is completely covered with water; fill the sink, a large pot or bucket.
• Stir in 1/4 cup of Baking Soda. This should work on two bottles - if you have more add more soda.
• Soak for half an hour. Some labels will start falling off after this time. Using a Stanley knife or razor blade you can carefully scrape off any sticky labels.
• If labels are being stubborn soak for another hour or even overnight.
• Scrape off any remaining label and use sponge or cloth to remove any sticky bits.
• Extra sticky residue can be removed with a baby wipe or eucalyptus oil.
• Wipe and dry and add your new label! DONE!

Applying your label/s

• Make sure your bottle and hands are dry and clean. 
• Remove backing from the label - there should be a score there for easy removal.
• Find the spot on your bottle you want your label - starting in the middle of the label - press firmly. 
• To stop air bubbles from appearing, work from the middle of your label out and smooth all the way to the edges. You can do one side at a time if that is easier.

NOW ENJOY!